How much does a bathroom remodel cost in District of Columbia?
A bathroom remodel in District of Columbia typically runs about $35,000, with most projects landing between $26,000 and $64,000. Where you land comes down to the finish you choose, how hard your site is to work in, and where in the district you build.
What decides your number
Two bathroom projects the same size can land thousands apart. Three things move the total more than anything else, and the first one does most of the work.
TradesMetrics prices every job at one of four finish levels. This single choice is what stretches the range above from $26,000 to $64,000.
Basic
$26–32kStandard
$32–38kPremium
$42–50kLuxury
$54–64k2 · Site access
An easy ground-floor bathroom with parking is cheaper to work in than a tight upper-floor space with stairs and no loading. Difficult access adds labor hours for moving materials and debris.
3 · Where in DC
Local trade wages and material costs set the baseline, and District of Columbia's larger metros run higher than its smaller cities. Costs vary across cities in District of Columbia.
Where the money goes
Here is a standard-finish, normal-access District of Columbia bathroom. Ballpark figures for planning, not a line-item quote.
| Category | Share | Cost |
|---|---|---|
| Cabinetry | 5% | $1,500 |
| Plumbing & electrical | 43% | $12,200 |
| Flooring, paint & finishes | 24% | $6,900 |
| Labor (install + trades) | 27% | $7,600 |
| Total cost of work | 100% | $28,200 |
That $28,200 is what the work costs, before your markup and a contingency reserve. Here is how it becomes the price a client pays.
Markup is not margin
Here is that same $28,200 priced the way you bid it: each cost type marked up, plus a 10% contingency. What you keep is smaller than the markup looks, and that gap is where bids lose money.
| Cost element | Your cost | Markup | Client price |
|---|---|---|---|
| Labor (own crew) | $3,900 | 40% | $5,500 |
| Materials | $10,000 | 10% | $11,000 |
| Equipment | $300 | 10% | $300 |
| Subcontractors | $14,000 | 10% | $15,400 |
| Permits & fees | $0 | 0% | $0 |
| Contingency (10% reserve) | $2,800 | 0% | $2,800 |
| Total | $31,000 | +$4,000 | $35,000 |
- Total cost: $31,000
- Price to client: $35,000
- Profit: $35,000 − $31,000 = $4,000
- Markup = profit ÷ cost = $4,000 ÷ $31,000 = 13%
- Margin = profit ÷ price = $4,000 ÷ $35,000 = 11%
Same $4,000, two different numbers. You put 40% on your own labor, but it is a small slice; subs and materials carry only 10% and dominate the job, so the blend lands at 13% markup and just 11% margin. Inside TradesMetrics you set these per cost type and watch the margin move as the job changes.
Try the markup vs margin calculator →Get your exact number in 2 minutes, free
Skip the ballpark. Pick your job, your city, your finish level and your site access. The free estimating tool prices it line by line, with no signup.
Start your free estimate →Common questions
- How much does a bathroom remodel cost in District of Columbia in 2026?
- Most District of Columbia bathroom remodels run between $26,000 and $64,000, with a typical project around $35,000. An entry-finish, full-scope build comes in lower, while a luxury custom build with layout changes runs higher.
- What is the difference between basic, standard, premium and luxury?
- Basic is a full-scope bathroom build at entry finish: budget materials and standard fixtures, same layout. Standard steps up to mid-range materials and finishes with minor changes. Premium is semi-custom with high-end finishes and some layout change. Luxury is full custom: reworked layout and top-tier materials throughout.
- How much does a bathroom remodel cost per square foot?
- A full bathroom remodel typically runs about $420 to $510 per square foot at a standard finish, more for premium and luxury.
- Why does the price vary so much?
- For a District of Columbia bathroom, finish level is the biggest driver, then site access and where in the district you build. Trade wages vary by region, and larger metros run higher than smaller cities.
- Is this an estimate or a quote?
- It is an estimate: a planning range built from regional cost data and your finish level. A quote is a firm price a contractor gives after seeing the site and final selections. Use the estimate to set a budget, then get a quote to lock it in.
- How much should I budget for surprises?
- Add a 10 to 20 percent contingency on top of the estimate for hidden conditions like outdated wiring or plumbing found once the work opens up.
- What is the difference between markup and margin?
- On a standard bathroom priced with TradesMetrics default markups, plus a 10 percent contingency reserve, the job costs you $31,000 and the client pays $35,000. That $4,000 difference is a 13 percent markup over cost but only an 11 percent margin of the price, because the low-markup subs and materials dominate the job.
- What is the real cost of labor on a job?
- Base wage is not the real cost. Once you add payroll taxes, workers comp, benefits and paid time off, a worker costs 35 to 50 percent more than their hourly wage. Estimating off base wage is a common way to lose money.